Designed to maintain marination at a temperature of 34ºF or colder in the holding tank- Typical flowrate is based on 40 GPM with a 6-degree temperature decrease and an internal
velocity of approximately 7 ft./sec which allows for both adequate cooling velocity and a velocity for CIP circulation.
- Load calculations based on refrigerant temp being 10 degrees colder than target process temp.
- ASME Certified to 250 PSI stainless steel construction
- Heat transfer design pressure: 250PSIG@-20 to 300F
- Heat transfer surface will be designed, fabricated, and stamped to ASME section VIII,
latest edition, and latest addendum.
- Control of HEX is integrated into the mixing system controls
- Liquid contact surfaces are 4B polished SS with one-piece end cap including sanitary clamps, ferrules, and gaskets.
- Heat Exchanger is insulated and jacketed with stainless.
- Does not include refrigeration valves
- Mix/Chill Tanks come in both jacketed and non-jacketed design. Jacketed tanks can be designed to use NH3 or Glycol as cooling media. Non-Jacketed tank systems are designed to be used in conjunction with a heat exchanger to maintain temperatures for processing.